Explain each step you took to create the effect?
Do you believe using Wireframe and Image added creativity to your project? If so, explain why you think so. If not, explain why you don't think so.
Describe how you used wireframe and image in your project?
Explain each step you took to create the effect? Do you believe using Wireframe and Image added creativity to your project? If so, explain why you think so. If not, explain why you don't think so.
57 Comments
Delia D
3/19/2013 10:10:49 pm
I used wire frame and image to tilt pictures, change the size, and overlap other pictures on top of pictures. I used it to make a collage like slide of pictures, and i was able to time each picture to he audio as it came in. Also, i was able to adjust where the pictures were on the slide so that way no other pictures were cut off or not able to be seen.
Reply
Austin P
3/19/2013 10:11:55 pm
The way I used wireframe and image in my project was I put the two pictures to the beat of my song and made them pop up at different times. When you use wireframe and image you have to make both of the pictures smaller than one another so that they will fit into the frame. I believe that using wireframe and image made my project a lot better because it makes your project look a lot cooler than what it really is
Reply
Claire K
3/19/2013 10:12:03 pm
The way I used wire frame and image in my project was I picked two pictures that were about the same thing (softball), and I layered them together. I had to make sure the second picture would come in and fit into the frame.
Reply
victoria s
3/19/2013 10:12:15 pm
I used wireframe & image to put two pictures on a slide. I had to crop the photo, make them the same length, so they would go up, and dissapear at the same time. I also added effects for it to dissapear,.
Reply
chloe d
3/19/2013 10:13:15 pm
The way I used wire frame and image in my project is I picked two pictures and then I layered them on top of each other. I like using wire frame and image because I think its a way to make my project look cooler.
Reply
nick
3/19/2013 10:13:24 pm
i put three images on the same screen using wireframe and image
Reply
Melissa C
3/19/2013 10:14:23 pm
I used wire frame and image to have two pictures showing at a time. I adjusted the sizes of both images to make sure that they would both be seen. I was able to overlap certain parts of the pictures. I added an effect to both so one didn't just appear out of nowhere after the first was already there. I also tilted the pictures to arrange them in a creative way. Wire frame and image definitely added creativity to my project. Instead of everything being the same and have one picture at a time i was able to have more than one picture.
Reply
Eddy.B
3/19/2013 10:15:03 pm
I used wireframe and image to displace images and rotate them. I did this to add more pictures into a clip. This adds more variety I could put them in. I believe it did add creativity to your project because you can rotate them or move them however you want.
Reply
JohnPoltor
3/19/2013 10:15:03 pm
I used wireframe and image to add multiple pictures to appear at once and it to rotate images. I turned on the wire frame and image effect on and rotated and put a couple shots in at once. Yes, wireframe and image adds creativity to the project. It always for cool and good looking effects to be made.
Reply
Christian Collignon
3/19/2013 10:16:12 pm
I used wireframe and image to stack pictures and out three or four pictures in the same screen and used it to resize them and fit them to each other.
Reply
delia d
3/19/2013 10:16:23 pm
continued:
Reply
M. Falasca (Period 4)
3/19/2013 10:32:00 pm
In my all about me project, I've used wireframe and image by putting two images into one frame. To put two images into one frame, you'd need to make a new track sequence. Then when you're wanting to put two images into two frame you put them over one another. By using wire frame and image go to the viewer window and click the square then click "Image+Wireframe". From there you would hover the yellow marker over the image and when the image pops up in the viewer drag it around until you see fit. I believe that Wireframe and Image added creativity to my project! It allowed for me to put two images into two frame at once and have images over the top of one another too!!
Reply
Peter Jough
3/19/2013 10:37:57 pm
I made 2 pics in one shot with several images. I made the pic larger and smaller to fit the images in the shot. Yes I believe i did wire frame and image well
Reply
mswietkowski
3/20/2013 12:19:19 am
I used wireframe and image to put two pictures at the same time. To create the effect I turned on wireframe and image. Then I scaled down the picture and put it in the corner. Finally, I added another picture on V2 and scaled that down. I think that wireframe and image did add creativity to my project because it was not just showing one picture at a time, it was multiple pictures.
Reply
OBEUTELper2
3/20/2013 12:20:13 am
I used wireframe and image in my project to put more than one picture in at time. I could angle and resize the pictures. I would put a picture in my timeline, then find another picture and drag it into the timeline above the original picture. Wireframe and image did make my project more creative. It would have been boring to see just one picture at a time.
Reply
AlanM per2
3/20/2013 12:27:23 am
You use wireframe and image when you need to move the picture you are putting on the time line. You can move the image so you an put more than one picture on the frame. To do this you must select wireframe and image on the picture. Then can apply one picture to every track so they are all visible. Wireframe and image adds creativity because you can show more than one image at the same time. It can make the movie look a lot better.
Reply
Knoruzi
3/20/2013 12:32:44 am
Wireframe and image was a very crucial part of my project, and I used it in multiple parts of the video. I used it to make pictures smaller or to zoom, and also to position pictures in different parts of the frame. I also used it to put smaller pictures in V2 to overlap pictures. To create the wireframe and image, I first turned it on, then made pictures smaller or larger by grabbing on to the corner of the picture and dragging in or out to make it bigger or smaller. In the end, I can definitely see that using this feature made my project a lot more creative and it added variety by making different sizes for pictures and putting them in different position, rather than just the same size and place all the way through.
Reply
Molly B
3/20/2013 12:35:05 am
I used wireframe and image in my project by first shrinking one picture, and then adding another picture onto it and shrinking that one.
Reply
Allie B
3/20/2013 12:40:48 am
I used wireframe and image to add creativity and something different to my project. I put one picture on top of each other in final cut, and then I shrunk them so you were able to see them in one frame. Wireframe and image added creativity to my project because it had something different in it. It added a collage look, and made the appearance different to make my project more creative.
Reply
AllisonL
3/20/2013 12:41:40 am
I used wireframe and image to group together two pictures. You shrunk down each image and placed them where you wanted them to appear in the sequence. I think it added creativity because you were able to show more than one image or group together pictures that corresponded with each other like a team picture or baby pictures.
Reply
rlawton
3/20/2013 12:49:39 am
i think it added a great design that could not be shown unless using wireframe
Reply
klow
3/20/2013 12:52:35 am
No because it is too complicated.
Reply
Bella G
3/20/2013 12:55:41 am
i used wire-frame and image when i was putting things together like if i have 2 sports i like i can put them together or like a then and now picture i can put them together so you can see the difference from then to now.
Reply
Devon Colley
3/20/2013 02:03:16 am
I used wire frame and image to make a some what of a Bradey Bunch effect where there are two pictures together.
Reply
Joey Ayers
3/20/2013 02:08:04 am
I used wireframe and image to add a flag to background one of my pictures. I first dragged the image, then shrunk my other image to fit the background. I think wireframe and image helped add creativity to my project because I made a colorful background for my picture, making it stand out.
Reply
Zach D Period 9
3/20/2013 02:08:53 am
I used wire frame and image to get 4 pictures on one slide. With the use of wire frame and image it gives my video a whole other view. I first put all four images on top of each other in final cut. Then I made the first image that appeared smaller and the other ones too. Then I made them sideways to make them fit on the page. Using wire frame and image made my project more creative because it gave it another look on how you view my video.
Reply
Char
3/20/2013 02:21:15 am
I put four pictures together at the same time by using wireframe &image.
Reply
nhaiduk(period 9)
3/20/2013 02:24:10 am
I didn't use wireframe and image. I think it is a cool thing to have but I decided to just have a full picture on each slide with transitions.
Reply
Riley f
3/20/2013 02:25:46 am
In my project i used wireframe and image to make the pictures go to the beat and show multiple pictures at once. To create the effect first i clicked on a picture then changed the setting to wireframe+image and rearranged my picture how i wanted. Then I put the newly re-sized photo in my project and repeated that step with multiple images and over laid them so they popped up and disappeared at different times. I think it added a cool effect to my project and made my project look more advanced.
Reply
JPatel Pd.9
3/20/2013 02:30:05 am
For wireframe and image, I didn't use it because some of the pictures wouldn't let me shrink or enlarge it. But when I tried to use it, the picture wouldn't be showed.
Reply
Jwolstromer9
3/20/2013 02:34:38 am
I used wireframe and image to make a slide of my favorite TV shows. I had to put the two pictures on top of each other, then i moved them and twisted them around to make it look cool. Using wireframe and image did add creativity to my project. Instead of just having boring one image slides, wireframe and image made it interesting by having two image slides.
Reply
j.Tecchio
3/20/2013 02:36:41 am
Yea i do believe it added creativity because it makes it more interesting and fun to watch. Also because you could have 2 pictures on one slide.
Reply
T Lowe
3/20/2013 01:24:21 pm
I used wireframe and image by taking the image from the sequence and shrinking it to be able to fit multiple images. I activated wireframe and image and used it to fit all of the photos I needed into one slide. I dragged all of my photos I needed and put them on top of each other in the slide and adjusted the size to be able to fit all of the photos in the slide. I repeated those steps for a few other slides. I believe that wireframe and image added some creativity to my project because I could take all of the photos from that subject and put them into one convenient slide.
Reply
KathleenH
3/20/2013 10:08:18 pm
In my project, I used wireframe and image to rotate my picture because it was upside down. I clicked wireframe and image, selected the corner, and turned it around so it was facing the right way. I don't think that using wireframe and image added creativity to my project because it made the picture regular, not stand out.
Reply
mmiros
3/20/2013 10:10:45 pm
first i picked texture for my name then a background to make it better looking. then a added an effect so it would show up in a cool way. it made my project better looking then it was before.
Reply
Chris Geimke
3/20/2013 10:16:55 pm
To create and put in a wireframe and image in my project, i had to first get the picture i wanted to use, then click image and wireframe. after that, i picked what size i wanted the image to be. making the size small can allow me to place to pictures on the same part of the video at the same time. I think wireframe and image added creativity to my project because it allowed me to put pictures in a creative way.
Reply
ZRUIZ
3/20/2013 10:17:50 pm
I used wireframe and image at the end of my project to show me and my dog at the same time.To create a wireframe & image i selected an image then clicked image + wireframe and that allowed me to make the image any size, allowing me to have more than one image on the screen at a time. NO I don't think wireframe & image gave creativity to my project because I really did not use it that much.
Reply
CPonce
3/22/2013 01:11:24 am
To create wireframe and image i had to pick at least to pictures than layer each one on top of each other. In my opinion wireframe and image did make my project more creative.
Reply
SKim
3/22/2013 11:33:52 pm
I used wireframe and image in my project to place one picture over another picture. I used two picture and made changed that size of the picture and put them in different lines. I think it adds creativity to my project because it adds more variety to my project instead of putting plain pictures. It would draw the viewer's attention.
Reply
David R
3/24/2013 02:14:17 pm
I used wireframe and image in my project to put 4 images on the screen simultaneously. Above the picture in a drop down box, I changed the setting from image to wireframe and image. Then I was able to move the image around on the screen, and I was able to add more images by dragging them into different video tracks. I think it added some creativity to my project, but it wasn't that great. It has other good applications like showing lots of things at once, but I only had 4 pictures, and that really wasn't enough to make wireframe and image particularly useful.
Reply
PMcDermott
3/25/2013 02:06:37 am
I used wire frame and image in my project by showing three pictures at once. To do this you had to go to the three pictures you wanted to use then click on the top right and click wire frame and image. Wire frame and image added creativity to my project because there was multipule things to look at the same time.
Reply
Armand C
3/25/2013 07:23:39 am
I used wireframe and image in my project to make it possible for me to show the viewer more than on image at a time. I did this by selecting one picture and making it smaller and then doing the same with another picture and I stacked the two on top of each other. I do think that wireframe and image added creativity to my project because it made it possible for me to show two ideas that were related to each other and have them both come up on the screen at the same time.
Reply
CBrigante
3/25/2013 11:43:17 am
I did use wire-frame and image in my project. I enjoyed using it also I feel that it added something different to my project and I thought it was really cool to use. Creating wire-frame and image was actually very simple and easy, you just had to click the little drop down box then select wire-frame and image and then you can shrink the pictures you want to be together and then set them up so then can fade in and fade out. I really enjoyed using wire-frame and image in my project and would like to use it in my future projects as well.
Reply
BKrebs p4
3/25/2013 10:08:29 pm
I used wireframe and image to group together pictures to show unity. This added creativity because more than one picture was displayed at once that corresponded with one another. The appearance of the photos could be played around with to vary the sequence up. I really liked how wireframe and image allowed me to use more images to make this All About Me more lively and personal.
Reply
francinel
3/26/2013 01:17:18 am
I used wireframe and image by taking two pictures and putting them on at once and also I made 4 of the pictures smaller and i put effects and quick transitions on them.
Reply
EDiCostanzo
3/26/2013 09:09:18 am
Reply
bobby c
3/26/2013 10:09:13 am
i used wireframe and image in my project to show 3 different baby pictures at the same time. I edited the size of the three pictures and layered them over each other in the v1, v2 and v3 categories. I think wireframe and image does add creativity it is used the right way.
Reply
Pranav M. P.9
3/26/2013 12:44:41 pm
I used wire frame and image to enlarge a few of my pictures because they were small. All I did was click on the little button that toggled between image and wire, frame and image then I adjusted my photo so that it was more visible. I don't believe it added to the quality of my project although it had the potential to if I used it for more than what I did.
Reply
Kyle R per 9
3/27/2013 09:21:24 am
I used wireframe and image in my project to show two pictures of me at the same time. I believe wirefreame and image added creativity to my project because it showed effort in your project.
Reply
Miranda Boes
3/27/2013 09:48:28 am
I used wire frame and image in my project by layering pictures on top of one another. I adjusted my photos so that I was able to fit more on the frame. I believe that it did add some creativity to my project because it made it more interesting to watch. I picked all the pictures that involved me playing sports and put them all together to show what I enjoyed doing.
Reply
MKane
3/29/2013 04:18:35 am
I used wire frame by taking one picture to start and making it smaller. Then I took another picture and changed the size to put next to the other picture. Wire frame allows for more than one picture to be visable at the same time.
Reply
s. greene
3/31/2013 10:37:53 am
I didn't use wire frame and image but I do know how to use it. All you have to do is layer the images into v1,v2 and so on and so forth depending on how many pictures you want to show. I think I should have used it to make my project more creative.
Reply
Destiny N
4/5/2013 12:02:15 am
wireframe and image is used to show two pictures at once.
Reply
DBurns
4/7/2013 08:57:23 am
I used wireframe and image in my project for the effect of layering. I made a background for an image by using wireframe and image. I enlarged an image so it took up the whole background then I placed an image on top of that one and made that image smaller so the two images made an effect of a picture on a background. I think wireframe and image added creativity to the project because instead of just one picture you can layer and slant the pictures to make it less boring by only having one picture.
Reply
kristy mutchko
4/18/2013 12:33:08 am
I used wireframe and image to fix the size and the position of the pictures. Yes, I believe wireframe and image did make my project more creative because theres not just one picture to look at on each slide.
Reply
TLind
4/18/2013 12:46:49 am
I used wireframe and image to rotate and resize my pictures. You could also use wire frame and image to make a collage of all your pictures. I think wire frame and image adds an effect of creativity to the project because it looks more interesting than just one picture.
Reply
JP9
4/22/2013 03:06:46 am
i didn't use wireframe and images. i just used full pictures
Reply
Your comment will be posted after it is approved.
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2015
Categories |